Setup Guide

File Server Settings

Set up a le server and ensure connectivity.

To allow le transfers to the switch, congure the le server that holds the boot and conguration les. The system recognizes HTTP,

HTTPS, SFTP, TFTP, FTP, USB, and Flash URLs.

For example:

• tftp://server ip or name/filename

• ftp://user:passwd@serverip or name//mypath/Dell-A.B.C.D.bin

• flash://filename

• http://host[:port]/file-path

• https://[<user:pass>@]host[:port]/file-path

• sftp://user:passwd@server//path/filename

• usbflash://path/filename

When loading the Dell EMC Networking OS image, if the Dell EMC Networking OS image on the server is dierent from the image on the

local ash, the system downloads the image from the server onto the local ash and reloads using that image. If the Dell EMC Networking

OS image on the server is the same image, the system loads the conguration le, if present, or the startup-cong without downloading a

new image.

Domain Name Server Settings

To determine the host name applied in the switch startup conguration, when no conguration le is retrieved from the DHCP server, set

up a domain name server (DNS).

The DNS is contacted only when no conguration le is contained in a DHCP server response and the host name is not resolved from the

network-cong le on the switch.

BMP MIB Support

The Management Information Base (MIBs) and the corresponding congurations are as follows:

MIB OID

Value and Functionality

1.3.6.1.4.1.6027.3.23.1.1 1 or 2 (BMP or Normal reload-type)

1.3.6.1.4.1.6027.3.23.1.

1 or 2 (Enable or Disable auto-save option)

1.3.6.1.4.1.6027.3.23.1.

1 or 2 (Enable or Disable config-scr download option)

1.3.6.1.4.1.6027.3.23.1.

0 - 50 (DHCP timeout value cong)

1.3.6.1.4.1.6027.3.23.1.

0 - 50 (Set BMP Retry count )

1.3.6.1.4.1.6027.3.23.1.

String (Set the vendor-class identier values up to a maximum of 60 characters)

1.3.6.1.4.1.6027.3.23.1.

1 or 2 (Enable or Disable relay option)

36 Bare Metal Provisioning