Users Guide

To display detailed information about a hypervisor session, enter the VSN interface and/or virtual-switch name generated by the
hypervisor, as the show virtualswitch output displays.
• Display information on virtual machines accessed on a switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID.
Display the virtual machines accessed on a switch interface.
EXEC Privilege mode
show vmmap interface
NOTE: In the show vmmap and show virtualswitch output, VLAN 1 displays as VLAN ID 1; VLAN 4095 displays
without a VLAN ID as "- ".
Example of the
show configuration hypervisor session command.
DellEMC(conf-hypervisor)#show config
!
hypervisor LocalNetwork
mode config
access https://10.10.10.10 username admin password 7 1d28e9f33f99cf5c
Example of the show hypervisor supported command.
DellEMC#show hypervisor supported
vmware
xen-citrix
Example of the show virtualswitch all hypervisor sessions command.
DellEMC#show virtualswitch
Interface VSwitch Hypervisor
Gi 0/32 vSwitch3 VMWare_vmware207
Po 7 vSwitch1 VMWare_vmware206
Example of the show virtualswitch specied hypervisor sessions command.
DellEMC#show virtualswitch GigabitEthernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
Example of the show vmmap virtual machines accessed command.
DellEMC#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Redhat_207_03_nfs 00:0c:29:4f:66:19 -
Redhat_207_03_nfs 00:50:56:92:00:77 138
Virtual Server Networking
127