Users Guide

Version Description
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the MXL Switch. Updated the parameters for S4810, S4820T, and Z9000.
9.1(0.0) Updated the command mode from EXEC Privilege to GLOBAL CONFIGURATION.
Updated the parameter from jumpstart to bmp. Added support for the config-scr-
download and user-defined-string commands. Supported platforms are S4810,
S4820T, and Z9000.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced in Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.1.0 Introduced on the S4810.
Related Commands
• show reload-type — displays the current Reload mode (BMP mode or Normal mode).
• stop bmp — stops the BMP process and prevents a loop if the DHCP server is not found.
retry-count
Allows you to congure the number of retries for downloading the Dell EMC Networking OS image and conguration le.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, IOA, FN-IOM, and MXL
Syntax
retry-count number
To reset the number of retries, use the no retry-count number
Parameters
retry-count
number
Enter the keyword retry-count, then the number of times to retry downloading the
Dell EMC Networking OS image, conguration le, or script le from the DHCP / le
servers, if the servers are not reachable. The retry limit is from 0 to 6. If the retry limit is 0,
no retry performs. The default is 0.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S6100–ON.
48 Bare Metal Provisioning CLI