Users Guide
Version Description
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and
MXL.
Related Commands
• reload-type — allows you to congure the reload-type options in reload-type sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal mode).
verify
Validates the software image on the ash drive after the image transfers to the system but before the image installs.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, , IOA, FN-IOM, and MXL
Syntax
verify {md5 | sha256} [flash://] img-file [hash-value]
Parameters
md5 MD5 message-digest algorithm.
sha256 SHA256 Secure hash algorithm.
[ash://] ash (Optional) Species the ash drive. The default is to use the ash drive. Enter the
lename of the image.
img-le Enter the name of the Dell EMC Networking software image le to validate.
hash-value (Optional) Specify the relevant hash published on the Dell support page.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
56 Bare Metal Provisioning CLI