Owner's Manual

What’s New
The new features for this release include:
Support for deployment of Windows operating system in Unified Extensible Firmware Interface
(UEFI) mode.
Using DTK utilities you can deploy the following operating system:
o Microsoft Windows Server 2012 R2 Datacenter, Foundation, Essentials, and Standard
editions
o Novell SUSE Linux Enterprise Server 11 SP3 (64bit)
o Red Hat Enterprise Linux 6.5 (64bit)
RAIDCFG extends support to Dell PERC 9 (H730P Adapter) with the following features:
o RAID 10 virtual disk with uneven span.
o Advanced 4K sector hard disk drives.
o T10 Protection Information (PI) for data integrity.
Support for USB bootable DTK embedded Linux ISO image. See Using USB.
Availability of DTK in Systems Management Tools and Documentation DVD.
RAIDCFG configuration supports the following options configured through RAID controller BIOS:
o Configuring the boot mode of the controller.
o Configuring the auto import property of the controller.
o Rebuilding physical disks associated with a virtual disk.
o Configuring the array disk state to online or offline.
o Converting RAID to Non-RAID and vice versa on an array disk.
o Replacing the physical disk of a virtual disk.
o Executing consistency check on a virtual disk.
o Erasing the encrypted physical disk.
o Displaying the following in the array disk details:
Power state
Disk State
S.M.A.R.T. state
Maximum Device Link Rate
Negotiated Link Rate
Secured State
Encryption Capability
NOTE: See the Dell OpenManage Deployment Toolkit Command Line Interface
Reference Guide available at dell.com/openmanagemanuals.
Support for the following Dell PowerEdge servers:
o R920
o M820VRTX
o R220
Added support for the following Network Interface Cards (NICs), Converged Network Adapters
(CNAs), and Fiber Channels (FCs):
o Mellanox ConnectX-3 Dual Port 10 GbE DA/SFP+ Network Adapter
o Mellanox ConnectX-3 Dual Port 10 GbE KR Blade Mezzanine Card
o Mellanox ConnectX-3 Dual Port 40 GbE QSFP+ Network Adapter