Quick Reference Guide

* Maximum Device Link Rate

* Negotiated Link Rate

* Secured State

* Encryption Capability

NOTE: For more details on array disk enumeration, see Enumerating Array Disks.

• Support for the following Dell PowerEdge servers:

– R920

– M820VRTX

– R220

• Added support for the following Network Interface Cards (NICs), Converged Network Adapters

(CNAs), and Fiber Channels (FCs):

– Mellanox ConnectX-3 Dual Port 10 GbE DA/SFP+ Network Adapter

– Mellanox ConnectX-3 Dual Port 10 GbE KR Blade Mezzanine Card

– Mellanox ConnectX-3 Dual Port 40 GbE QSFP+ Network Adapter

– Emulex OCe14102-UX-D Dual Port 10Gb SFP+ CNA

– Emulex OCm14102-U3-D Dual Port 10Gb KR Blade Mezz

– Emulex OCm14102-U2-D Dual Port 10Gb KR Blade NDC

– Emulex OiCm14104-UX-D Quad Port 10Gb DA/SFP+ Rack NDC

• Deprecated support for the following operating systems:

– SUSE Linux Enterprise Server 10 SP4

– Red Hat Enterprise Linux 6.4 (64-bit)

– SUSE Linux Enterprise Server 11 SP2

NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software

Support Matrix at dell.com/openmanagemanuals.

Supported Systems

For a complete list of supported Dell PowerEdge systems, see the Dell Systems Software Support Matrix

in the required version of OpenManage Software at dell.com/openmanagemanuals

Supported Operating Systems

For Windows, the DTK utilities support Windows PE 3.0 (32-bit and 64-bit), Windows PE 4.0 (64-bit), and

Windows PE 5.0 (64-bit). Using the DTK utilities, you can deploy the following Windows operating

systems:

• Microsoft Windows Server 2012 R2 Datacenter, Foundation, Essentials, and Standard editions using

Windows PE 5.0 (64–bit)

• Microsoft Windows Server 2012 (64-bit) using Windows PE 4.0 (64-bit)

• Windows Server 2008 R2 SP1 using Windows PE 4.0 (64-bit) and Windows PE 3.0 (64-bit)

• Windows Server 2008 SP2 (32-bit and 64-bit) using Windows PE 3.0 (32-bit and 64-bit)