Quick Reference Guide

Option Sub-option Valid
Arguments
Description Applicable
Systems
destipaddr=192.168.100.
15
Example 2 (to set the
destination IP address as
FQDN):
A:>syscfg lcp --
alertdest=1 --
destipaddr=xxx.yyy.com
--alertdest
1, 2, 3,
4
Sets the destination for the
LAN alert. This sub-option can
be replicated.
--vlantag enable,
disable
Enables or disables VLAN
tagging. This sub-option can
be replicated.
--vlanid <string>
Sets the 12-bit VLAN ID. This
sub-option can be replicated.
--vlanpriority 0–7
Sets the VLAN priority value.
This sub-option can be
replicated.
--macaddress
NA Displays the BMC MAC
address. This sub-option
cannot be replicated.
--nicselection
NOTE: This
option is available
only with the
appropriate
installed license.
shared,
sharedfai
lover,
dedicated
,
sharedrec
eiveonall
Sets the operating mode of
the NIC to shared,
sharedfailover,
dedicated, or
sharedreceiveonall. Some
of these options are not
applicable on certain systems.
This option is
applicable on
systems prior to
PowerEdge 12G
systems. The
sharedreceive
onall argument
is available only
on PowerEdge
11G systems.
--nicselection
NOTE: This
option is available
only with the
appropriate
installed license.
dedicated
, lom1,
lom2,
lom3,
lom4
Sets the operating mode of
the iDRAC7 NIC to
dedicated, lom1, lom2,
lom3, or lom4. Some of these
options are not applicable on
certain systems due to
underlying hardware.
NOTE: This
option is
applicable
on
PowerEdge
11G systems.
--
nicselectionfailo
ver
NOTE: This
option is available
only with the
appropriate
installed license.
none,
lom1,
lom2,
lom3,
lom4, all
Sets the operating mode of
the NIC selection failover to
none, lom1, lom2, lom3,
lom4, or all. Some of these
options are not applicable on
certain systems. due to
underlying hardware.
NOTE: This
option is
applicable
on
PowerEdge
12G systems.
116