Quick Reference Guide

Option Valid Arguments Short Description Mandatory or
Optional
sbm
or
setbootmode
Sets the bootmode of the
controller to 0 (BIOS stop on
error), 1 (BIOS continue on
error), or 2 (Headless continue
on error) during system startup
or reboot.
See Setting Boot Mode
for specific usage
information.
sghs
or
setglobalhotspare
Assigns the specified disks as
global hot spares on the
specified controller.
Optional. See
Assigning,
Unassigning, And
Listing Global Hot
Spares for specific
usage information.
sli
or
slowinit
Initializes the virtual disk for the
specified controller using the
slowinit command.
See Initializing Virtual
Disks for specific
usage information.
spciels
or
setPCIeLinkSpeed
Sets the PCIe link speed of the
controller to 2 or 3.
See Setting And
Displaying The PCIe
Link Speed for specific
usage information.
gpciels
or
getPCIeLinkSpeed
Displays the PCIe link speed of
the controller.
See Setting And
Displaying The PCIe
Link Speed for specific
usage information.
svdn
or
setvdname
Sets the name of the specified
virtual disk on the specified
controller.
See Setting Virtual Disk
Name for specific
usage information.
-ad or
adisk
NA Specifies an array disk
command.
See Enumerating Array
Disks for specific
usage information.
ch:targ,
ch:targ, ...
or ch:targ:lun,...
or ch:targ:enc
channel:target, or
channel:target:lun,
or
channel:target:enclo
sure
Specifies an array disk.
For SCSI controllers, the value of
LUN should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in
which case you must specify
values for channel, target, and
enclosure.
NOTE: You can also use
pdisk or -pd instead of
adisk or -ad to specify an
array disk.
Optional.
See Enumerating Array
Disks for specific
usage information.
149