Quick Reference Guide

CAUTION: Setting a physical disk online or offline may result in data loss. Either complete an
automatic rebuild of the physical disk or initiate a consistency check of the virtual disk after an
online task completes.
Table 25. Configuring Physical Disk State
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ad -ac=online
-ad|-pd=
ch:targ:encl -
c=id
or
adisk
action=online
adisk|
pdisk=channel:
target:enclosu
re
controllerid=i
d
NA NA
Sets the array disk state to online.
Example:
A:>raidcfg -ad -ac=online -
ad=0:1 -c=2
-ad -
ac=offline -
ad|-pd=
ch:targ:encl -
c=id
or
adisk
action=offline
adisk|
pdisk=channel:
target:enclosu
re
controllerid=i
d
NA NA
Cancels the rebuild of the physical disk
associated with a specified virtual disk.
Example:
A:>raidcfg -ad -ac=offline -
ad=0:1 -c=2
Replacing Physical Disk Of A Virtual Disk
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for replacing the
physical disk of a virtual disk with a ready state disk.
Table 26. Replacing Physical Disk Of A Virtual Disk
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-vd -
ac=replacepd -
vd=id
ch:targ:encl -
c=id
or
vdisk
action=replace
NA NA
Replaces the physical disk of a virtual
disk by a ready state disk, whose size is
greater than or equal to the size of the
physical disk.
Example:
A:>raidcfg -vd -ac=replacepd -
vd=2 -c=2 -src=0:1 -dest=0:1
176