Quick Reference Guide

Resetting The Controller
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for resetting the
controller.
Table 30. Resetting The Controller
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=rst or
controller
controllerid=i
d action=reset
NA NA
Resets the specified controller.
Example:
A:>raidcfg -ctrl -c=2 -ac=rst
Enabling And Disabling Persistent Dedicated Hot Spares
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enabling and
disabling dedicated hot spares.
Table 31. Enabling And Disabling Persistent Dedicated Hot Spares
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=ephs
or
controller
controllerid=i
d
action=enablep
eristenthotspa
re
NA NA
Assigns the slot corresponding to the
hot spare drive as persistent. Any drive in
the slot functions as a hot spare if the
drive is qualified to be a hot spare.
Example:
A:>raidcfg -ctrl -ac=ephs -c=2
RAIDCFG Command successful!
--ctrl -c=id -
ac=dphs
or
controller
controllerid=i
d
action=disable
persistenthots
pare
NA NA
Disables the persistent slot
corresponding to the hot spare drive. If
the drive is removed from the slot and
any drive is inserted, the slot stops
functioning as a hot spare. You must
manually assign the drive as a hot spare
again.
Example:
A:>raidcfg -ctrl -ac=dphs -c=2
RAIDCFG Command successful!
Setting And Displaying The PCIe Link Speed
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting and
displaying the Peripheral Component Interconnect Express (PCIe) link speed of the controller.
179