Quick Reference Guide

Table 32. Setting and Displaying the PCIe Link Speed
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=spciels -
spd=<2 | 3>
or
controller
controllerid=i
d
action=setpcie
linkspeed
speed=<2 | 3>
NA NA
Sets the PCIe link speed of the controller
to PCIe Generation 2 or 3.
NOTE: Reboot the system to apply
the setting.
Example:
A:>raidcfg -ctrl -c=2 -
ac=spciels -spd=2
RAIDCFG Command successful!
--ctrl -c=id -
ac=gpciels
or
controller
controllerid=i
d
action=getpcie
linkspeed
NA NA
Displays the PCIe link speed of the
controller.
Example:
A:>raidcfg -ctrl -c=2 -
ac=gpciels
RAIDCFG Command successful!
Supported Controllers And Firmware Versions For PCIe Link Speed
The following table lists the controllers and minimum supported firmware versions for PCIe link speed.
Table 33. Supported Controllers And Firmware Versions For PCIe Link Speed
Controllers Component Minimum Supported Versions
PERC H710 H710 Adapter 21.2.0-0007
H710 Mini Monolithic 21.2.0-0007
PERC H710P H710P Adapter 21.2.0-0007
H710P Mini Monolithic 21.2.0-0007
PERC H810 H810 Adapter 21.2.0-0007
Setting Boot Mode
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting the
boot mode of the controller.
Table 34. Setting Boot mode
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=sbm —bm=<0|
1|2> or
controller
controllerid=i
NA NA
Sets the boot mode of the controller to
any of the following during the system
start or reboot:
• Stop on error (0)
• Continue on error (1)
180