Quick Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
Virtual_Disks: 0
Firmware Version:
V2.8-0[6064]
RAIDCFG Command successful!
-si or silent
NA
Does not display any information on the
terminal console. This option is optional
and can be added to the command line
in any order after any mandatory options
have been added.
Example:
A:>raidcfg -ctrl -si
-ver or
version
NA
Displays the version number of the
RAIDCFG utility. This option is optional
and can be added to the command line
in any order after any mandatory options
have been added.
Example:
A:>raidcfg -ver
RAIDCFG V4.4
Copyright (c) 2002-2014 Dell
Inc.
RAIDCFG Command successful!
Quick Reference To RAIDCFG Commands
The following table lists the basic RAIDCFG commands.
Purpose Command Description
To list all the RAID
controllers in a system
raidcfg -ctrl
Lists all the RAID controllers in the system.
Record the slot ID of the controllers for later
reference.
Example:
A:>raidcfg -ctrl -ac=sghs -c=2 -ad=0:1
RAIDCFG Command successful!
To list all the disks
attached to a particular
controller
raidcfg adisk -
c=slotid
Lists all the disks attached to the controller. The
slot ID is obtained from the first command.
Record the drive location of the disks for later
reference.
To create a virtual disk
with all the default
settings
raidcfg -ctrl -
ac=cvd -c=slotid -
ad= x:y,x:y,...
Creates a virtual disk of maximum available size for
type RAID 0. RAID 0 is the default.
The slot ID in <-c=slotid> and the array disks in
<-ad=...> are obtained from the first two
commands.
182