Quick Reference Guide

Error Code Message
119 One of the array disks selected for the virtual disk is
already in use.
120 Virtual disk operation not supported. Cannot use non-RAID
disk.
121 Controller Read Configuration failed.
122 Controller Write Configuration failed.
123 Controller cache flush failed.
124 Enable alarm on controller failed.
125 Disable alarm on controller failed.
126 Quiet alarm on controller failed.
127 Controller failed to perform the task.
128 Specified bus not found for controller.
129 Call to set cache mode on the controller failed.
130 Unexpected controller error.
131 Controller out of memory.
132 Invalid controller state.
133 Controller failed.
134 Controller busy.
135 Controller does not exist.
136 Controller name is invalid.
137 Controller is iterated.
138 Rename of virtual disk was not successful.
139 The controller was not able to erase the file system from the
specified virtual disk.
140 The controller was not able to add space to the specified
concatenation set.
141 The controller was not able to get the status of the specified
mirror set.
142 The controller was not able to set the requested failover
space.
143 The controller cannot get the failover space information.
144 Controller cannot unmirror the specified virtual disk.
145 The controller could not split the specified virtual disk.
204