Quick Reference Guide

Error Code Message
174 Cannot perform Create Virtual Disk or Delete Virtual Disk
while the other server in a cluster is online. Please shut one
of the servers down and retry the operation.
176 Invalid array disks or failover drives selected for
reconfigure/create operation. Please make sure that all array
disks and failover drives associated with the virtual disk are
selected.
177 The maximum number of partitions have already been created on
one of the selected array disk(s). Each array disk can hold
portions (partitions) of up to 10 virtual disks. This virtual
disk cannot be created because one or more array disk(s) have
reached the partition limit.
178 The virtual disk is in use. Please close any applications that
use the virtual disk and unmount any file systems that reside
on the virtual disk.
179 The firmware version is not supported. Please update the
firmware from http://support.dell.com.
180 The specified device does not have enough free space to be
used as failover space for the specified virtual disk.
181 The operation failed. Please rescan the controller and retry
the operation.
182 The operation cannot be performed while a task is running on
the specified virtual disk.
183 The specified virtual disk has no dead disk segments.
184 The operation cannot be performed at this time. The firmware
can recondition a battery that has a Degraded or Power Low
state. The firmware will not recondition a battery that is
functioning normally or that has a Ready, Failed or Missing
state.
185 The version of the controller firmware installed on your
system does not support this operation.
186 There are no disks of the correct type available to be
assigned as a hot spare.
187 There are no disks of sufficient size available to be assigned
as a hot spare.
188 There are no disks of the correct type and sufficient size
available to be assigned as a hot spare.
189 The Create Virtual Disk task was successful but the operating
system may not be aware of the new virtual disk.
206