Quick Reference Guide

: enable, disable

• On 12G and later systems

: Enabled, Disabled

Description Enables or disables the boot sequence retry feature. When set to

enable, the system re-attempts to set the boot order after a 30-

second time-out if the last boot attempt has failed. This option can

be replicated.

A:>syscfg --bootseqretry=enable

bootseqretry=enable

Applicable Systems All PowerEdge systems

Integrated Devices

You can use the options in this group to manage the integrated devices such as internal NIC and

integrated USB.

--EmbNicPortnBootProto

Valid Arguments

• On systems prior to 12G

: NA

• On 12G and later systems

: Unknown, None, Pxe, Iscsi

Description

Controls the legacy boot protocol of the LOM port specified by the

embedded NIC port number. This is a write-only attribute. This

attribute is for systems management software use, and does not

appear in system BIOS setup. This attribute always returns Unknown,

when read. There is no change to the LOM port legacy boot protocol

setting when Unknown is returned. An error is returned if written with

a setting (None, PXE, or iSCSI) that is not supported by the LOM Port.

Example:

A:>syscfg --EmbNicPortnBootProto=Unknown

EmbNicPortnBootProto=Unknown

Applicable Systems PowerEdge 12G and later systems

--EmbVideo/--embvideoctrl

Valid Arguments

• On systems prior to 12G

: enable, disable

• On 12G and later systems

: Enabled, Disabled

Description

Enables or disables the BIOS support for the Embedded Video

Controller