Quick Reference Guide

--RedundantMem/--redmem

Valid Arguments

• On systems prior to 12G

: off, spare, mirror, DDDC

• On 12G and later systems

: Disabled, Spare Mode, Mirror Mode, Intra-Node Mirror Mode,

DIMM Spare Mode, Double DRAM ECC

Description

Allows selection of the required redundant memory mode, or

disables redundant memory. This option can be replicated.

Example:

A:>syscfg --redmem=off

redmem=off

Applicable Systems PowerEdge M910, R910, and R810 systems and 12G systems with

Intel Xeon 7500 series processor

--SerialDbgOut

Valid Arguments

• On systems prior to 12G

:NA

• On 12G and later systems

: Enabled, Disabled

Description

Enables or disables the RC/MRC Serial debug output.

Example:

A:>syscfg --SerialDbgOut=Enabled

SerialDbgOut=Enabled

Applicable Systems PowerEdge 12G and later systems.

--SysMemSize/--mem*

Valid Arguments

• On systems prior to 12G

: read-only

• On 12G and later systems

: read-only

Description

Displays the amount of main memory in the system.

Example:

A:>syscfg --mem

mem=500

Applicable Systems PowerEdge 11G and later systems.

--SnoopFilter/--snoopfilter

Valid Arguments

• On systems prior to 12G