Quick Reference Guide

Example:

A:>syscfg --ProcBusSpeed

Applicable Systems PowerEdge 12G and later systems.

--ProcCores/--cpucore

Valid Arguments

• On systems prior to 12G

: 1, 2, 4, 6, 8, 10, 12, 14, 16, all

• On 12G and later systems

: single, all, dual, quad, 1, 2, 4, 6, 8, 10, 12, 14, 16

Description

Controls the number of enabled cores in each processor. The default

value is set to the maximum number of cores per processor. The

number of cores depends on the processor. Reading the cpucore

that is set to the highest value of number of cores displays as all.

For example, if 6-core CPU is installed, after setting to the highest

value, 6, when you read the cpucore, it displays as all.

Example:

A:>syscfg --cpucore=1

cpucore=1

Applicable Systems All PowerEdge systems.

--ProcCoreSpeed*

Valid Arguments

• On systems prior to 12G

: NA

• On 12G and later systems

: read-only

Description

Displays the clock speed of the processors.

Example:

A:>syscfg --ProcCoreSpeed

Applicable Systems PowerEdge 12G and later systems.

--ProcExecuteDisable/--cpuxdsupport

Valid Arguments

• On systems prior to 12G

: enable, disable

• On 12G and later systems

: Enabled, Disabled

Description

Enables or disables the Execute Disable Memory Protection

Technology feature of the CPU.

Example:

A:>syscfg --cpuxdsupport=enable

cpuxdsupport=enable