Quick Reference Guide

: read-only
Description
Sets the system password for the BIOS. The system password is
required when booting the system. The argument string supplied to
this option is the password. Generally, passwords are limited to
alphanumeric characters and cannot exceed 32 characters in length.
If a current system password is set, it must be given through the
oldsyspwd option. This option is not replicated. For more information
on delimiters, see Command Line Option Delimiters .
Example 1:
A:>syscfg --syspwd=password
The password has been set. Please use a warm reboot
to apply the password to the system.
Example 2:
A:>syscfg --syspwd=password --oldsyspwd=password
The password has been set. Please use a warm reboot
to apply the password to the system
.
NOTE: You cannot disable your password using DTK. To disable
your password, you must use the system BIOS.
Applicable Systems
All PowerEdge systems
--SystemCpldVersion*
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: read-only
Description
Displays the current revision of the Complex Programmable Logic
Device (CPLD) of the system.
Example:
A:>syscfg --SystemCpldVersion
Applicable Systems PowerEdge 12G and later systems
--TcmActivation/--tcmactivation
Valid Arguments
• On systems prior to 12G
: enabled, disabled, and nochange
• On 12G and later systems
: NoChange, Activate, Deactivate
Description
Allows the user to change the operational state of the Trusted
Cryptography Module (TCM). This field is read-only when TCM
Security is set to Off.
NOTE: The tcmactivation option is a sub-option of tcm.
86