Quick Reference Guide

Example:
A:>syscfg --assignintr=standard
assignintr=standard
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--bezelir
Valid Arguments enable, disable
Description Enables or disables the ESM to monitor and log front bezel intrusion
conditions.
Example:
A:>syscfg --bezelir=enable
bezelir=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--cmosdefaults
Valid Arguments
enable, disable
Description
Enables or disables the request for a default CMOS value during the
next reboot.
A:>syscfg --cmosdefaults=enable
cmosdefaults=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--conboot
Valid Arguments
enable, disable
Description
Enables or disables configuring or reporting of console redirection
after reboot. This option is available on all supported systems that
support console redirection. This option can be replicated.
Example:
A:>syscfg --conboot=enable
conboot=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12Gsystems
--conred
Valid Arguments
serial1, serial2, off, bmcsol, mmb
Description
Configures or reports the communication port for console
redirection. If this option is set to serial port, then the serial port
option is not available. If only one serial port is present on a system,
the serial2 argument is not available. This option can be replicated.
90