Reference Guide

Option Sub-option Arguments Description
--undotpmclear
NA
Cancels the result of the tpmclear setting. If
you specify this setting before specifying the
tpmclear setting, the There is currently
no pending TPM Clear request
message is displayed.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
undotpmclear --setuppwdoverride
--valsetuppwd
<string>
Validates the setup password for TPM
authentication. If you try to change DTK
settings, you are prompted to enter this
password to access the settings. For more
information on delimiters, see Command
Line Option Delimiters.
Example:
A:>syscfg tpm --
tpmactivation=enabled --tpmclear
--valsetuppwd=<setup_password>
--
setuppwdoverri
de
NA
On systems that do not have a setup
password configured, if you set this option,
you are not prompted for a password to
access DTK settings.
A:>syscfg tpm --
tpmactivation=enabled --tpmclear
--setuppwdoverride
SYSCFG For BMC And Remote Access Controller
Configuration
SYSCFG configures Baseboard Management Controller (BMC) and Remote Access Controller (RAC)
settings.
NOTE: Some of the following options or arguments might not be available on all systems.
NOTE: For options that use text strings such as username, password, hostname, and community
string, using some characters such as <space>, <, >, | , or = on the command line can be
misinterpreted by the command line parser and cause errors.
NOTE: The following options or arguments are also applicable to DRAC 5.
The following tables document valid options, sub-options, and arguments along with a description of the
expected behavior of each option and suboption. Options, sub-options, and arguments are case-
sensitive. All options, sub-options, and pre-defined arguments are lowercase unless explicitly stated
otherwise. Some features that must be noted while reading this section are:
• Unless otherwise specified, all sub-options to options are optional.
• If a sub-option is not specified for an option, all valid sub-option values are displayed for the option. If
sub-options are specified, then only those suboptions are reported.
102