Reference Guide

Option Sub-
option
Valid
Arguments
Description Applicable
Systems
Example:
A:>syscfg --
kvmstatusonlcd=active
kvmstatusonlcd=active
lancfgparams
Option Sub-option Valid
Arguments
Description Applicable
Systems
lancfgpara
ms or lcp
Configures and displays LAN
configuration parameters. This
option can be replicated.
All PowerEdge
systems
--ipaddrsrc static,
dhcp
Sets the IP address source for
the LAN channel. This sub-
option can be replicated.
--ipaddress <ipaddres
s>
Sets the IP address for the LAN
channel. This sub-option
cannot be replicated.
--subnetmask <subnetma
sk>
Sets the subnet mask for the
LAN channel. This sub-option
can be replicated.
--gateway <gateway>
Sets the gateway for the LAN
channel. This sub-option can
be replicated.
--commstring <string>
Sets the community string
(maximum of 16 printable
ASCII characters) used in a
platform event trap (PET). This
sub-option can be replicated.
--destipaddr
<ipaddres
s>
Sets the destination IP address
or Fully Qualified Domain
Name (FQDN) for the alert
destination specified with the
alertdest sub-option.
The destipaddr sub-option
is dependent on the
alertdest suboption. If the
alertdest sub-option is not
specified on the command
line, the first alert destination
(
alertdest=1) is set with this
IP address or FQDN. This sub-
option can be replicated.
Example 1 (to set the
destination IP address):
A:>syscfg lcp --
alertdest=1 --
NOTE: FQDN
is applicable
only for
destipaddr
option and is
supported
only on
PowerEdge
12G systems.
115