Reference Guide

Option Sub-option Valid
Arguments
Description Applicable
Systems
administra
tor
activate the SOL. This option
can be replicated.
--
solcharaccuminte
rval
1–255
Sets the Character
Accumulate Interval in 5–ms
increments (1–255). This sets
the typical amount of time
that the BMC waits before
transmitting a partial SOL
character data packet. This
option can be replicated.
--
solcharsendthres
hold
1–255
Specifies that the BMC
automatically sends an SOL
character data packet
containing this number of
characters in increments of 5
(1–255) as soon as this
number of characters (or
greater) has been accepted
from the baseboard serial
controller into the BMC. This
option can be replicated.
NOTE: On PowerEdge
9G and SC1435 systems,
the maximum limit is
255.
--solbitrate 9600,
19200,
57600,
115200
Sets the serial channel
communication bit rate (in
bps) with the BMC when SOL
is activated. This option can
be replicated.
NOTE: The arguments
for solbitrate vary
with various Dell
systems. If an argument
valid for a particular Dell
system is entered for
another system, the
Parameter out of
range error is
displayed.
Valid arguments are:
• 57600 — for PowerEdge
9G systems that do not
have DRAC 5 installed.
• 115200 — for PowerEdge
9G systems that have
DRAC 5 installed.
Example 1 (to display the
current SOL configuration):
A:>syscfg solcfgparams
solcfgparams
132