Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
controllercont
rollerid=id
foreignclear
controllers and is not supported on SAS
controllers..
If you use this argument on a controller
that does not have a foreign
configuration, the No Foreign
configuration present in the
controller message is displayed.
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnclr
-ctrl -c=id
-ac=fgnrvr
or
controller
controllerid=i
d
action=foreign
recover
NA NA
Recovers the foreign configuration
detected in the selected controller. This
feature is supported on PERC 5 and later
controllers and is not supported on SAS
controllers.
If you use this argument on a controller
that does not have a foreign
configuration, the No Foreign
configuration present in the
controller message is displayed.
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnrvr
Configuring Physical Disk Rebuild
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for configuring
the rebuild of the physical disks associated with a virtual disk.
Table 23. Configuring the Disk Rebuild
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-vd -ac=rbd -
ad|-pd=
ch:targ:encl -
c=id
or
vdisk
action=rebuild
adisk|
pdisk=channel:
target:enclosu
re
controllerid=i
d
NA NA
Rebuilds the physical disk associated
with a specified virtual disk.
Example:
A:>raidcfg -vd -ac=rbd -ad=0:1
-c=2
-vd -ac=crbd -
ad|-pd=
ch:targ:encl -
c=id
NA NA
Cancels the rebuild of the physical disk
associated with a specified virtual disk.
174