Reference Guide

Error Code Message
93 File does not have write permission.
94 The file contains invalid options.
95 The replication information does not match for this system.
96 There can only be one section in the input file.
97 Bad ini file, the section cannot be found.
98 The format of the bios image file is incorrect.
99 Report operations and set operations must be separate.
100 Help is not available for the option.
101 The -x (--hex) option can only be used with -b or -r.
102 Input file not found.
103 Input file cannot be read.
104 Invalid argument for option.
105 Function table lookup error.
106 The machine ID was not found in the file.
107 The system memory information is not available.
108 Mode can only be used with the --pci option.
109 The device name or index must be present in the boot order.
110 The output file could not be opened. Please make sure the path
exists and the media is not write protected.
111 Could not write to output file, disk may be full.
112 The current password must be supplied with a new password
using --oldsyspwd.
113 The current password must be supplied with a new password
using --oldsetuppwd.
114 The current password can only be supplied when setting a new
password.
115 Actions are not allowed for this filter. Only alerts are
allowed.
116 There was an error getting the option.
117 The option is not available or cannot be configured through
software.
118 There was an error setting the option.
119 The -n (--namefile) option can only be used with - -pci.
193