Reference Guide

--InternalUsb2/--internalusbport2
Valid Arguments
• On systems prior to 12G
: on, off
• On 12G and later systems
: On, Off
Description
Turns the internal USB port 2 on or off.
Example:
A:>syscfg --internalusbport2=on
internalusbport2=on
Applicable Systems All PowerEdge 12G and later systems.
--IoatEngine/--ioat
Valid Arguments
• On systems prior to 12G
: enable, disable
• On 12G and later systems
: Enabled, Disabled
Description
Enables or disables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This option must be enabled only if the hardware and
software support I/OAT on your system. This option can be
replicated.
Example:
A:>syscfg --ioat=enable
ioat=enable
Applicable Systems All PowerEdge systems.
--OsWatchdogTimer/--oswatchdogtimer
Valid Arguments
• On systems prior to 12G
: enable, disable
• On 12G and later systems
: Enabled, Disabled
Description
Aids in the recovery of the operating system when the system stops
responding. When this option is set to enable, the operating system is
allowed to initialize the timer. When set to disable (the default), the
timer has no effect on the system.
Example:
A:>syscfg --oswatchdogtimer=enable
oswatchdogtimer=enable
Applicable Systems All PowerEdge systems.
41