Reference Guide

Example:

A:>syscfg --CorrEccSmi=Enabled

CorrEccSmi=Enabled

Applicable Systems PowerEdge 12G and later systems

--DynamicCoreAllocation

Valid Arguments

• On systems prior to 12G

: NA

• On 12G and later systems

: Enabled, Disabled

Description

Enables or disables the operating system capability to maintain the

logical processors in the idle state to reduce power consumption.

Example:

A:>syscfg --DynamicCoreAllocation=Enabled

DynamicCoreAllocation=Enabled

Applicable Systems PowerEdge 12G and later systems

--MemOpMode/--memoperatingmode

Valid Arguments

• On systems prior to 12G

: optimizer, mirror, advancedecc

• On 12G and later systems

: OptimizerMode, SpareMode, MirrorMode, AdvEccMode,

SpareWithAdvEccMode

Description

Selects the memory operating mode. This feature is active only if a

valid memory configuration is detected. When OptimizerMode is

enabled, the DRAM controllers operate independently in 64-bit mode

and provide optimized memory performance. When MirrorMode is

enabled, only half of the installed memory is reported as available to

the operating system. When

AdvECCMode is enabled, the two DRAM

controllers are combined in 128-bit mode to provide optimized

reliability. Memory that cannot be teamed by the controllers is not

reported to the operating system. When SpareMode is enabled, the

memory size reported to the operating system does not include the

spare portion.

Example:

A:>syscfg --memoperatingmode=optimizer

memoperatingmode=optimizer

Applicable Systems

PowerEdge 11G and later systems

--MemOpVoltage/--dimmvoltage

Valid Arguments

• On systems prior to 12G

: auto, 1.5