Reference Guide

: read-only
Description
Indicates the type of device attached to the embedded SATA port.
Example:
A:>syscfg --eSataPort1DriveType
Applicable Systems PowerEdge 12G and later systems.
--eSataPort1Model*
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --eSataPort1Model
Applicable Systems PowerEdge 12G and later systems.
--SataPortA/--sata0
Valid Arguments
• On systems prior to 12G
: auto, off
• On 12G and later systems
: Off, Auto
Description
Sets the drive type of the selected device to off or auto This option
can be replicated.
Example:
A:>syscfg --sata0=auto
sata0=auto
NOTE: This option maps to --sata_a for PowerEdge 9G systems.
Applicable Systems All PowerEdge systems
--SataPortACapacity*
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortACapacity
63