Reference Guide

Applicable Systems PowerEdge 12G and later systems
--SerialComm/--serialcomm
Valid Arguments
• On systems prior to 12G
: on, com1cr, com2cr, off
• On 12G and later systems
: OnNoConRedir, OnConRedirCom1, OnConRedirCom2, Off
Description Enables or disables the serial communication devices (Serial Device 1
and Serial Device 2) in BIOS.
Applicable Systems All PowerEdge 12G and later systems.
--SerialPortAddress/--serialportaddrsel
Valid Arguments
• On systems prior to 12G
: default, alternate
• On 12G and later systems
: Serial1Com1Serial2Com2, Serial1Com2Serial2Com1, Com1,
Com2
Description
Sets the port address of the serial devices.
On systems prior to 12G, when this option is default, Serial Device 1 is
set to COM port 1 and Serial Device 2 is set to COM port 2.
On systems prior to 12G, when this option is alternate, Serial Device 1
is set to COM port 2 and Serial Device 2 is set to COM port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems PowerEdge 11G and later systems
Slot Disablement
You can manage the slot disablement settings using the options in this group.
--Slot1
Valid Arguments
• On systems prior to 12G
:NA
• On 12G and later systems
: Enabled, Disabled, BootDriverDisabled
Description
Enables or disables the specified slot.
Example:
A:>syscfg --Slot1=Enabled
Slot1=Enabled
74