Reference Guide

--embnic2
Valid Arguments on, off, onnopxe, onwithiscsi
Description
Turns the second embedded NIC on with PXE enabled, off, or on
without PXE enabled. This option is only valid for supported systems
that have two embedded NICs. If the second NIC is enabled without
PXE, it is not found in the boot order. If the second NIC is turned on
with PXE, it is placed at the end of the boot order. The onnopxe
argument is not supported on all systems. This option can be
replicated.
The onwithiscsi argument enables the embedded NIC to boot from
the iSCSI server. The embnic2 option can be replicated.
Example:
A:>syscfg --embnic2=onnopxe
embnic2=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embnic2pxe
Valid Arguments
enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the
second embedded NIC. If PXE is disabled, the second NIC is not
found in the boot order. If PXE is enabled, the second NIC is placed
at the end of the boot order. This option is only present on systems
that do not support the embnic2 option. This option can be
replicated.
Example:
A:>syscfg --embnic2pxe=enable
embnic2pxe=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embnic3
Valid Arguments
on, off, onnopxe, onwithiscsi
Description
Turns the third embedded NIC on with PXE enabled, off, or on
without PXE enabled. This option is only valid for supported systems
that have three embedded NICs. If the third NIC is enabled without
PXE, it is not found in the boot order. If the third NIC is turned on
with PXE, it is placed at the end of the boot order. The onnopxe
argument is not supported on all systems. This option can be
replicated.
The onwithiscsi argument enables the embedded NIC to boot from
the iSCSI server. The embnic3 option can be replicated.
Example:
A:>syscfg --embnic3=onnopxe
embnic3=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
93