Reference Guide

--embnic3nic4
Valid Arguments enable, disable
Description
Enables or disables the operating system interface of the third and
fourth embedded NIC controllers.
Example:
A:>syscfg --embnic3nic4=enable
--embnic3nic4=enable
Applicable Systems PowerEdge 11G systems
--embnic4
Valid Arguments
on, off, onnopxe, onwithiscsi
Description
Turns the fourth embedded NIC on with PXE enabled, off, or on
without PXE enabled. This option is only valid for supported systems
that have four embedded NICs. If the fourth NIC is enabled without
PXE, it is not found in the boot order. If the fourth NIC is turned on
with PXE, it is placed at the end of the boot order. The onnopxe
argument is not supported on all systems. This option can be
replicated.
The onwithiscsi argument enables the embedded NIC to boot from
the iSCSI server. The embnic4 option can be replicated.
Example:
A:>syscfg --embnic4=onnopxe
embnic4=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embnics
Valid Arguments
enable, disable
Description
Turns both the embedded NICs on or off. This option is only present
on systems that do not support the embnic1 and embnic2 options.
This option can be replicated.
Example:
A:>syscfg --embnics=enable
--embnics=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embscsi1
Valid Arguments
on, off
Description
Turns the first embedded SCSI controller. This option is only valid for
supported systems that have an embedded SCSI controller. This
option can be replicated.
94