Reference Guide

Example:
A:>syscfg --embscsi1=on
embscsi1=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embscsi2
Valid Arguments
on, off
Description
Turns the second embedded SCSI controller. This option is only valid
for supported systems that have an embedded SCSI controller. This
option can be replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embscsiraid
Valid Arguments
raid, off, scsi
Description
Sets the specified value for the SCSI RAID controller. This option is
only valid for supported systems that have SCSI ROMB. Some
systems do not support the scsi argument. This option can be
replicated.
CAUTION: If you change the controller from SCSI to RAID
mode, data loss may occur. Backup any data you must save
before changing modes.
Example:
A:>syscfg --embscsiraid=raid
embscsiraid=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embscsiraidchb
Valid Arguments
raid, scsi
Description
Sets the second channel on an embedded RAID controller to SCSI or
RAID. This option is only valid for systems that support RAID/RAID
and RAID/SCSI settings for channels A and B. This option can be
replicated.
Example:
A:>syscfg --embscsiraidchb=raid
embscsiraidchb=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
95