Users Guide

4. Click Unzip.

By default, files are unzipped to C:\. You can unzip the DTK components to your local hard drive and

then copy them later to a network volume, or you can change the installation path to an available

network share. For example, you can unzip the files directly to the network share (for example, Z:\)

that you plan to use in the deployment process.

NOTE: Do not copy the DTK components to a Novell NetWare network volume. The DTK

network-based deployment is not supported from mapped Novell NetWare systems. The DTK

utilities do not run in Windows PE when Novell’s Client32 is loaded.

The files are unzipped in the directory structure as shown in the following figure.

DTK Components On Systems Running Windows

Workstation is the system on which the DTK components are extracted.

Source system is an optimally configured system from which the system settings are captured.

Target system is the system on which the settings captured from the source system are replicated.

DTK utilities for 32-bit systems are located in the following directories:

• Utilities: \Dell\x32\Toolkit\Tools

• Sample scripts: \Dell\x32\Toolkit\Template\Scripts

• Sample configuration files:\Dell\x32\Toolkit\Template\Configs

DTK utilities for 64-bit systems are located in the following directories:

• Utilities: \Dell\x64\Toolkit\Tools