Users Guide

Toolkit Components Purpose

RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.

stsvc.ini Configuration file used by raidcfg.

syscfg

• Reports and configures BIOS, BMC, and DRAC.

• Maintains the system state between reboots.

• Reports hardware devices and other system-related information.

SyscfgErrorCodes.txt Lists the error codes and messages for the syscfg tool.

sys.ini A .ini file used with syscfg.

UpinitErrorCodes.txt Lists the error codes and messages for upinit.sh.

Sample Configuration Files For Windows

The following table describes examples of Windows configuration files used to perform a scripted

deployment. The Windows files for 32-bit and 64-bit supported systems are located in the following

directories:

• \Dell\x32\Toolkit\Template\Configs

• \Dell\x64\Toolkit\Template\Configs

NOTE: All configuration files are provided as examples only. These sample configuration files must

be edited before they can be used in any deployment tasks.

Table 8. Sample Configuration Files for Windows

Toolkit

Components

Purpose Location

raccfg.ini

Sample configuration file for DRAC 4 remote

access controllers.

\Toolkit\Systems\<system>

raidcfg.ini

Sample output file to enable RAID replication. \Toolkit\Systems\<system>

winbom.ini

Sample file used to start the racsvc and

mr2kserv services.

\Toolkit\Template\Configs

winpeoem.sif

Sample file to add support for Dell mass

storage drivers.

\Toolkit\Template\Configs

Sample Configuration Files For Linux

The following table describes examples of Linux configuration files used to perform a scripted

deployment. The Linux files are located at opt/dell/toolkit/template/configs.

NOTE: All configuration files are provided as examples only. The sample configuration files must be

edited before they can be used in any deployment tasks.