CLI Guide

Example:
A:>syscfg --memintleave=enable
memintleave=enable
NOTE: The memintleave option is same as Nodeinterleave
option. For more information, see Memory Settings group.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--memremap
Valid Arguments off, auto
Description
Sets the memory remapping to off or auto.
Example:
A:>syscfg --memremap=off
memremap=off
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--mouse
Valid Arguments
on, off
Description
Turns the mouse controller on or off.
This option can be replicated.
Example:
A:>syscfg --mouse=off
mouse=off
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--noraidprompt*
Valid Arguments
NA
Description
Specifies that the BIOS must not prompt for confirmation when
changing the mode of a RAID controller. This option can only be
used with the --embscsiraid or --embscsiraidchb options.
Without this option, the user is prompted during POST to confirm the
change of a RAID controller from RAID (SCSI) to SCSI (RAID). This
option is not replicated.
127