CLI Guide

kvmstatusonlcd
Option Sub-
option
Valid
Arguments
Description Applicable
Systems
--
kvmstatusonlc
d
NA
active,
inactive
Configures the Dell Virtual KVM
(vKVM) session status on the LCD.
Example:
A:>syscfg --
kvmstatusonlcd=active
kvmstatusonlcd=active
PowerEdge 11G
systems
lancfgparams
Option Sub-option Valid
Arguments
Description
lancfgparams
or lcp
Configures and displays LAN
configuration parameters. This option
can be replicated.
--ipaddrsrc static,
dhcp
Sets the IP address source for the LAN
channel. This sub-option can be
replicated.
--ipaddress <ipaddress>
Sets the IP address for the LAN
channel. This sub-option cannot be
replicated.
--subnetmask <subnetmask
>
Sets the subnet mask for the LAN
channel. This sub-option can be
replicated.
--gateway <gateway>
Sets the gateway for the LAN channel.
This sub-option can be replicated.
--commstring <string>
Sets the community string (maximum
of 16 printable ASCII characters) used
in a platform event trap (PET). This
sub-option can be replicated.
--destipaddr
<ipaddress>
Sets the destination IP address or Fully
Qualified Domain Name (FQDN) for
the alert destination specified with the
alertdest sub-option.
The destipaddr sub-option is
dependent on the
alertdest sub-
option. If the alertdest sub-option
is not specified on the command line,
the first alert destination
(
alertdest=1) is set with this IP
address or FQDN. This sub-option
can be replicated.
133