CLI Guide

RAIDCFG Options And Arguments
Table below lists all of the valid options, parameters, and arguments for the RAIDCFG utility. For more
information on valid RAIDCFG options and their specific uses, see RAID Configuration Utility Options and
Arguments.
Mandatory command line options must be present in the command. Optional command line options can
be typed in any order after the mandatory options have been typed. Many options have both a short and
long format. Short and long format options cannot be used in the same command line instance.
Table below shows some examples of valid and invalid short and long format command line instances.
For an explanation of the specific order for each option, see RAID Configuration Utility Options And
Arguments. For a list of frequently used RAID commands, see Quick Reference To RAIDCFG Commands.
NOTE: Some of the following options or arguments might not be available on all systems.
Table 12. RAIDCFG Short and Long Format Options
Option Valid Arguments Short Description Mandatory or
Optional
No option
-h
-?
or
/?
NA Displays general usage
information for the utility. The
usage information consists of a
comprehensive list of valid
options, parameters, and
arguments.
Optional.
See General Help for
specific usage
information.
-ac or
action
blink
Blinks the specified physical
disks on the specified controller.
See Blinking And
Unblinking Array Disks
for specific usage
information.
ci
or
cancelinit
Cancels the slow or full
initialization on the selected
virtual disk.
See Initializing Virtual
Disks for specific
usage information.
cc or consistencycheck Checks the consistency for a
specified virtual disk.
See Consistency
Check For Virtual Disk
for specific
information.
ccc or
cancelconsistencyche
ck
Cancels the consistency check
for a specified virtual disk.
See Consistency
Check For Virtual Disk
for specific
information.
chsk
or
changesecuritykey
Changes the encryption key of
the encryption-capable
controller.
See Changing
Encryption Key for
specific information.
161