CLI Guide
--Usb3Setting
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: Auto, Enabled, Disabled
Description
Enables or disables the USB 3.0 port.
• Auto —USB ports operate at USB 2.0 speed.
• Enabled—USB ports operates at USB 3.0 speed.
• Disabled—USB 3.0 host controller is disabled and the speed is
set to USB 2.0.
Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
Applicable Systems
All systems prior to PowerEdge 13G systems
--CurrentEmbVideoState
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the current state of the Embedded Video Controller.
Example:
A:>syscfg --CurrentEmbVideoState
CurrentEmbVideoState=
xxx
Applicable Systems PowerEdge 12G and later systems
--InternalSdCardPrimaryCard
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
InternalSdCardPrimaryCard=SdCard1
Network Settings
You can manage the system network settings using the options in this group.
--PxeDevnEnDis
Valid Arguments
• On systems prior to 12G: NA
55