Release Notes
Issue 24: OpenManage Integration gets a security error message.
Description: Although the SSL Certificate is valid on a vCenter and user credentials are correct,
a user encounters an error message saying , “There are either too many Virtual Management
Console connections or an incorrect user name or password or session ID, or an incorrect SSL
certificate. Please verify these items and try again.”
Resolution/Workaround: This happens due to an invalid session in vCenter. Simply closing and
re-opening the vSphere client resolves seeing this error message. You can check your session by
clicking “Sessions” under Administration in the vSphere Client for advanced troubleshooting.
Version Affected: 1.5.1, 1.6 and later
Issue 25: Unable to boot to service partition while deploying OS ISO.
Description: Hypervisor deployments are failing on Dell 11
th
and 12
th
generation servers with this
error displayed on the screen during POST: “Warning: Unable to boot to Service Partition.”
There is a BIOS issue to identify the network ISO when there is a local USB CD-ROM installed on
the system and that USB CD-ROM is the only USB mass storage device plugged into the system.”
Resolution/Workaround: Remove the local USB CD-ROM (note that not all local CD-ROM would
expose this issue), or plug in additional USB floppy or USB key on the system, or attach the
virtual media (virtual floppy and virtual CD) from the iDRAC.
Version Affected: 1.5.1, 1.6
Issue 26: A firmware update fails with an error message saying that USC is in use and it should
be retried after 30 seconds.
Description: During a firmware update if the update fails with error message “If USC is in use,
wait until USC has exited and retry the action. Otherwise retry after 30 seconds to check if
network connectivity caused this error.”
Resolution/Workaround: To fix this issue, reset iDRAC and wait until iDRAC boots back up