OpenManage Integration for VMware vCenter Schnellinstallationsanleitung für vSphere Client, Version 2.
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG liefert wichtige Informationen, mit denen Sie den Computer besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS macht darauf aufmerksam, dass bei Nichtbefolgung von Anweisungen eine Beschädigung der Hardware oder ein Verlust von Daten droht, und zeigt auf, wie derartige Probleme vermieden werden können.
Inhaltsverzeichnis 1 Schnellstart-Installation.............................................................................................................4 Einführung in die Installation.................................................................................................................................... 4 Voraussetzungen......................................................................................................................................................
Schnellstart-Installation 1 Einführung in die Installation Dieses Handbuch enthält Schritt-für-Schritt-Anleitungen zur Installation und Konfiguration der OpenManage Integration for VMware vCenter-Installation auf Dell Servern.
ANMERKUNG: Das virtuelle Gerät fungiert als normales virtuelles Gerät. Jede Unterbrechung oder jedes Herunterfahren wirkt sich auf die allgemeine Funktion des virtuellen Geräts aus. Produkt-Hardware-Anforderungen Die OpenManage Integration for VMware vCenter bietet umfassenden Support für mehrere Generation von Dell-Servern mit voller Funktionsumfangunterstützung für Server mit verfügbarem iDRAC Express oder iDRAC Enterprise und eingeschränkten Support für Dell-Server einer älteren Generation.
1. Installieren Sie die OpenManage Integration for VMware vCenter. a. Stellen Sie sicher, dass die Systeme verbunden sind und der vCenter-Server sowie der vSphere-Client ausgeführt werden. b. Stellen Sie eine OVF-Datei (Open Virtualization Format), die die OpenManage Integration for VMware vCenter enthält, mithilfe des vSphere-Client bereit. c. Laden Sie die Lizenzdatei hoch. d. Registrieren Sie mithilfe der Administration Console die OpenManage Integration for VMware vCenter mit vCenter-Server.
Abbildung 1. Bereitstellen der OVF-Vorlage über vSphere 6. Klicken Sie im Fenster Quelle auf die Schaltfläche Durchsuchen, um das OVF-Paket zu suchen. Es kann sich auf dem lokalen Laufwerk, einem Netzlaufwerk bzw. einer CD/DVD befinden oder aus dem Internet heruntergeladen werden. Die Dateigröße der OpenManage Integration for VMware vCenter beträgt ca. 1,9 GB. ANMERKUNG: Wenn sich das OVF-Paket auf einer Netzwerkfreigabe befindet, kann die Installation zwischen 10 und 30 Minuten in Anspruch nehmen.
Bei einer Festplatte im Format „Thick Provision Eager-Zeroed“ wird der gesamte Speicherplatz bei der Erstellung zugewiesen. Dieser Festplattentyp erhöht den Zeitbedarf zur Erstellung der Festplatte, führt jedoch auch beim ersten Schreiben auf einen Block zur besten Leistung. 15. Klicken Sie auf Weiter. 16. Die Seite Netzwerkzuordnung, die Einzelheiten über die Quelle und Zielnetzwerke enthält, wird angezeigt. Klicken Sie auf Weiter. 17.
Zum Beispiel: https://10.210.126.120 oder https://meinesxihost. Bei der URL wird nicht zwischen Groß- und Kleinschreibung unterschieden. Abbildung 3. Verwaltungskonsole 6. Geben Sie im Anmeldefenster der Verwaltungskonsole das Kennwort ein, und klicken Sie dann auf Anmelden.
Abbildung 4. vCenter-Registrierungsfenster innerhalb der Verwaltungskonsole 7. Klicken Sie im Fenster vCenter-Registrierung auf Neuen vCenter-Server registrieren. 8. Führen Sie im Fenster Neues vCenter registrieren einen der folgenden Vorgänge aus: a. Geben Sie unter vCenter-Name im Textfeld IP oder Hostname des vCenter-Servers die IP oder den Hostnamen des Servers und anschließend in das Textfeld Beschreibung eine optionale Beschreibung ein. b.
ANMERKUNG: • Falls die Lizenzdatei geändert oder in irgendeiner Weise bearbeitet wurde, funktioniert sie nicht und Sie müssen eine E-Mail mit der ursprünglichen Bestellnummer, der SKU-Nummer und der Kontonummer an download_software@dell.com senden. • Es ist nicht möglich, die einzelne XML-Lizenzdatei zum Hochladen zu verwenden. Verwenden Sie stattdessen die XML-Lizenzdatei, die in einer komprimierten Datei enthalten ist.
Die URL der Verwaltungskonsole wird in der Registerkarte vSphere vCenter-Konsole angezeigt. • Verwenden Sie den Link auf der Seite Dell Management Console → Einstellungen. Die URL verwendet das folgende Format und es wird nicht zwischen Groß- und Kleinschreibung unterschieden: https://. 2. Klicken Sie im linken Bereich der Administration Console auf GERÄTEVERWALTUNG. 3. Zur Aktualisierung des virtuellen Geräts, führen Sie einen der folgenden Schritte aus: 4.
7. Laden Sie die neue Lizenzdatei hoch. Weitere Informationen finden Sie im Abschnitt Registrieren von OpenManage Integration for VMware vCenter und Importieren der Lizenzdatei im Schnellinstallationshandbuch für OpenManage Integration Version 2.2 Quick Install Guide. 8. Überprüfen des Geräts. Weitere Informationen zum Sicherstellen, dass die Datenbankmigration erfolgreich war, finden Sie im Abschnitt Überprüfung der Installation in diesem Handbuch. 9.
Grundlegende Informationen zur Konfiguration der OpenManage Integration for VMware vCenter mithilfe des Assistenten 2 Nachdem Sie die grundlegende Installation der OpenManage Integration for VMware vCenter abgeschlossen haben, muss es konfiguriert werden. Dies erfolgt in der Regel mit dem Konfigurationsassistenten, Sie können aber auch die Optionen auf der Seite „Einstellungen“ in den Optionen der Dell Management Center-Einstellungen verwenden. Die Benutzeroberfläche ist in beiden Bereichen ähnlich.
Erstellen des Verbindungsprofils ist im Konfigurationsassistenten und im Dell Management Center, Option „Einstellungen“ nahezu identisch. ANMERKUNG: Bei Installationen auf Hosts mit Dell PowerEdge-Servern ab der 12. Generation ist die Installation des OMSA-Agenten nicht erforderlich. Bei Installationen auf Servern der 11. Generation wird der OMSA-Agent jetzt automatisch vor dem Bereitstellungsprozess installiert. So erstellen Sie ein neues Verbindungsprofil mithilfe des Assistenten: 1.
Konfigurieren von Ereignissen und Alarmen [Assistent] Sie können Ereignisse und Alarme entweder mit dem Konfigurationsassistenten oder im Dell Management Center, Option „Einstellungen“ für Ereignisse und Alarme konfigurieren. ANMERKUNG: Auf Hosts vor 12G erfordert diese Funktion, dass das virtuelle Gerät als Trap-Ziel in OMSA konfiguriert wurde, um die Hostereignisse in vCenter anzuzeigen. So konfigurieren Sie Ereignisse und Alarme: 1.
c. Geben Sie das Proxy-Kennwort in das Textfeld Kennwort überprüfen erneut ein. 5. Aktivieren Sie unter Proxy das Kontrollkästchen Proxy verwenden. 6. Klicken Sie auf Speichern und fortsetzen, um die Änderungen zu übernehmen und fortzusetzen. Planen von Jobs zum Erstellen von Bestandsaufnahmen [Assistent] Die Vorgehensweise bei der Konfiguration eines Zeitplans zum Erstellen einer Bestandsaufnahme ähnelt der im Konfigurationsassistenten und den Optionen Einstellungen → Dell Management Center.
3. Klicken Sie auf Speichern und fortfahren, um die Änderungen zu übernehmen und fortzufahren. Konfigurieren des Anmeldeinformationen für die Bereitstellung [Assistent] Die Anmeldeinformationen für die Bereitstellung werden für die sichere Kommunikation mit einem Bare-Metal-System verwendet wird, das mit Hilfe der Auto-Erkennung erkannt wird. Für eine sichere Kommunikation wird iDRAC von der ersten Erfassung bis zum Ende des Bereitstellungsprozesses verwendet.
• NFS-Freigabe für xml-Datei: host:/share/filename.xml • NFS-Freigabe für gz-Datei: host: /share/filename.gz • CIFS-Freigabe für xml-Datei: \\host\share/filename.xml • CIFS-Freigabe für gz-Datei: \\host\share/filename.gz b. Wenn Sie eine CIFS-Freigabe verwenden, geben Sie Werte in die Felder Benutzername, Kennwort und Kennwort bestätigen ein, die Kennwörter müssen gleich sein. Diese Felder sind nur dann aktiv, wenn Sie eine CIFS-Freigabe verwenden.
Konfigurieren von NFS-Freigaben Zum Verwenden von NFS-Freigaben mit dem OpenManage Integration for VMware vCenter für Backups und Wiederherstellung, Firmware-Aktualisierungen und als Sicherheitsverzeichnis müssen bestimmte Elemente konfiguriert werden. CIFS-Freigaben erfordern keine zusätzliche Konfiguration. So konfigurieren Sie NFS-Freigaben: 1. Fügen Sie auf der Linux- oder Unix OS-Maschine, auf der die NFS-Freigaben gehostet werden, bei /etc/exports Folgendes hinzu: /share/path (rw) *(ro).
Weitere Konfigurationsinformationen 3 Ein vollständige Anleitung zu Konfigurations-, Verwaltungs- und Bereitstellungsoptionen der OpenManage Integration for VMware vCenter finden Sie im OpenManage Integration for VMware vCenter User's Guide (Benutzerhandbuch zur OpenManage Integration for VMware vCenter).