OpenManage Integration for VMware vCenter Version 3.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview......................................................................................................................... 4 Space required for provisioned storage...............................................................................................................................4 Default virtual appliance configuration................................................................................................................................ 4 Other documents you may need....
1 Overview This document contains updated information for your OpenManage Integration for VMware vCenter (OMIVV) and any other technical documentation included with OpenManage Integration for VMware vCenter software. The OpenManage Integration for VMware vCenter 3.2 now supports: • VMware vCenter server version 6.0 U3 • VMware ESXi version 6.0 U3 • PowerEdge R830 platform • OpenManage Server Administrator (OMSA) version 8.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter. Browser and Flash player requirements To display OpenManage Integration for VMware vCenter, a system must have a minimum 1024 x 768 screen resolution and a Web browser that meets minimum requirements based on the operating system.
Server Minimum Version PowerEdge R710 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R715 3.0.0 or later PowerEdge R810 2.5.0 or later PowerEdge R815 3.0.0 or later PowerEdge R910 2.5.0 or later PowerEdge M610 6.1.0 or later PowerEdge M610x 6.1.0 or later PowerEdge M710HD 5.0.1 or later PowerEdge M910 2.5.0 or later PowerEdge M915 2.6.0 or later PowerEdge T110 II 1.8.2 or later PowerEdge T310 1.8.2 or later PowerEdge T410 1.9.0 or later PowerEdge T610 6.1.
Table 4. BIOS for Dell PowerEdge 13th Generation Servers Server Minimum version R630 1.0.4 or later T630 1.0.4 or later R730 1.0.4 or later R730xd 1.0.4 or later R430 1.0.2 or later R530 1.0.2 or later T130 1.0.2 or later T330 1.0.2 or later T430 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later M630 1.0.0 or later M830 1.0.0 or later FC430 1.0.0 or later FC630 1.0.0 or later FC830 1.0.0 or later R830 1.0.0 or later Table 5.
Table 7.
Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 51 IMP UDP/TCP None N/A IMP Logical Address Maintenance No 5353 mDNS UDP/TCP In/Out Multicast DNS No 631 IPP UDP/TCP None Out Internet Printing Protocol (IPP) No 69 TFTP UDP 128-bit In/Out Trivial File Transfer No 111 NFS UDP/TCP 128-bit In SUN Remote Procedure Call (Portmap) No 68 BOOTP UDP None Out Bootstrap Protocol Client No OpenManage Integration for VMware vCenter requi
ESXi version support Server Generation 11G 12G 13G v6.0 U2 Y Y Y v6.0 U3 Y Y Y Supported vCenter Server versions for release 3.2 The OpenManage Integration for VMware vCenter will work with any of the following vCenter Server versions: vCenter version Desktop Client Support Web Client Support v5.1 U2 Y N v5.1 U3 Y N v5.5 U1 Y Y v5.5 U2 Y Y v5.5 U3 Y Y v6.0 Y Y v6.0 U1 Y Y v6.0 U2 Y Y v6.
Resource Platform 11th 12th 13th Hardware Inventory Y Y Y Events and Alarms Y (SNMP v1 only) Y (SNMP v1 and v2) Y (SNMP v1 and v2) Component wise Health Monitoring* Y Y Y BIOS/Firmware Updates** Y Y Y Warranty Information Y Y Y Host Compliance Y Y Y Auto / Manual discovery of bare metal Server Y Y Y Bare Metal compliance Y Y Y Hardware Configuration Y Y Y Bare Metal Hypervisor Deployment Y Y Y Blink Server LED Y Y Y View/Clear SEL logs Y Y Y Link and Launc
3 Important notes This section provides important information that you need to consider when you are working on OpenManage Integration for VMware vCenter. • OpenManage Integration for VMware vCenter supports BIOS mode to deploy Hypervisor on the target server. Make sure that you have BIOS mode selected in the reference hardware profile before applying the Hypervisor profile.
