Messages Reference Guide

Event Message Reference 17
Table 2-2. Temperature Sensor Messages
Event ID Description Severity Cause
1050 Temperature sensor has failed
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
If sensor type is not discrete:
Temperature sensor value (in degrees
Celsius):
<Reading>
If sensor type is discrete:
Discrete temperature state:
<State>
Information A temperature sensor on the
backplane board, system
board, or the carrier in the
specified system failed. The
sensor location, chassis
location, previous state, and
temperature sensor value
are provided.
1051 Temperature sensor value unknown
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
If sensor type is not discrete:
Temperature sensor value (in degrees
Celsius):
<Reading>
If sensor type is discrete:
Discrete temperature state:
<State>
Information A temperature sensor on the
backplane board, system
board, or drive carrier in the
specified system could not
obtain a reading. The sensor
location, chassis location,
previous state, and a
nominal temperature sensor
value are provided.
1052 Temperature sensor returned to a normal
value
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
If sensor type is not discrete:
Temperature sensor value (in degrees
Celsius):
<Reading>
If sensor type is discrete:
Discrete temperature state:
<State>
Information A temperature sensor on the
backplane board, system
board, or drive carrier in the
specified system returned to
a valid range after crossing a
failure threshold. The sensor
location, chassis location,
previous state, and
temperature sensor value
are provided.