Messages Reference Guide
Table Of Contents
- Dell OpenManage™ Server Administrator
- Messages Reference Guide
- Introduction
- Event Message Reference
- Miscellaneous Messages
- Temperature Sensor Messages
- Cooling Device Messages
- Voltage Sensor Messages
- Current Sensor Messages
- Chassis Intrusion Messages
- Redundancy Unit Messages
- Power Supply Messages
- Memory Device Messages
- Fan Enclosure Messages
- AC Power Cord Messages
- Hardware Log Sensor Messages
- Processor Sensor Messages
- Pluggable Device Messages
- System Event Log Messages for IPMI Systems
- Storage Management Message Reference
- Index
- Messages Reference Guide
24 Event Message Reference
1204 Current sensor detected a failure
value
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Previous state was:
<State>
If sensor type is not discrete:
Current sensor value (in Amps):
<Reading>
If sensor type is discrete:
Discrete current state:
<State>
Error A current sensor on the power
supply for the specified system
exceeded its failure threshold.
The sensor location, chassis
location, previous state, and
current sensor value
are provided.
1205 Current sensor detected a
non-recoverable value
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Previous state was:
<State>
If sensor type is not discrete:
Current sensor value (in Amps):
<Reading>
If sensor type is discrete:
Discrete current state:
<State>
Error A current sensor in the specified
system detected an error from
which it cannot recover. The
sensor location, chassis location,
previous state, and current
sensor value are provided.
Table 2-5. Current Sensor Messages (continued)
Event ID Description Severity Cause