Messages Reference Guide

28 Event Message Reference
Power Supply Messages
Power supply sensors monitor how well a power supply is functioning. Power supply messages listed in
Ta ble 2-8 provide status and warning information for power supplies present in a particular chassis.
1305 Redundancy degraded
Redundancy unit:
<Redundancy location
in chassis>
Chassis location: <Name of chassis>
Previous redundancy state was: <State>
Warning A redundancy sensor in the
specified system detected that
one of the components of the
redundancy unit has failed but
the unit is still redundant. The
redundancy unit location,
chassis location, previous
redundancy state, and the
number of devices required for
full redundancy are provided.
1306 Redundancy lost
Redundancy unit:
<Redundancy location
in chassis>
Chassis location: <Name of chassis>
Previous redundancy state was: <State>
Warning or
Error
(depending
on the
number of
units that are
functional)
A redundancy sensor in the
specified system detected that
one of the components in the
redundant unit has been
disconnected, has failed, or is
not present. The redundancy
unit location, chassis location,
previous redundancy state, and
the number of devices required
for full redundancy are provided.
Table 2-8. Power Supply Messages
Event ID Description Severity Cause
1350 Power supply sensor has failed
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
Power Supply type: <type of power
supply>
<Additional power supply status
information>
If in configuration error state:
Configuration error type:
<type of
configuration error>
Information A power supply sensor in the
specified system failed. The
sensor location, chassis location,
previous state, and additional
power supply status information
are provided.
Table 2-7. Redundancy Unit Messages (continued)
Event ID Description Severity Cause