Messages Reference Guide

Event Message Reference 31
Fan Enclosure Messages
Some systems are equipped with a protective enclosure for fans. Fan enclosure messages listed in
Ta ble 2-10 monitor whether foreign objects are present in an enclosure and how long a fan enclosure is
missing from a chassis.
Table 2-9. Memory Device Messages
Event ID Description Severity Cause
1403 Memory device status is <status>
Memory device location: <location in
chassis>
Possible memory module event cause:
<list of causes>
Warning A memory device correction rate
exceeded an acceptable value. The
memory device status and location
are provided.
1404 Memory device status is
<status>
Memory device location: <location in
chassis>
Possible memory module event cause:
<list of causes>
Error A memory device correction rate
exceeded an acceptable value, a
memory spare bank was activated,
or a multibit ECC error occurred.
The system continues to function
normally (except for a multibit
error). Replace the memory
module identified in the message
during the system’s next scheduled
maintenance. Clear the memory
error on multibit ECC error.
The memory device status and
location are provided.
Table 2-10. Fan Enclosure Messages
Event ID Description Severity Cause
1450 Fan enclosure sensor has failed
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
Information The fan enclosure sensor in the
specified system failed. The sensor
location and chassis location
are provided.
1451 Fan enclosure sensor value unknown
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
Information The fan enclosure sensor in the
specified system could not obtain a
reading. The sensor location and
chassis location are provided.
1452 Fan enclosure inserted into system
Sensor location:
<Location in chassis>
Chassis location: <Name of chassis>
Information A fan enclosure has been inserted
into the specified system. The
sensor location and chassis location
are provided.