Messages Reference Guide
Table Of Contents
- Dell OpenManage™ Server Administrator
- Messages Reference Guide
- Introduction
- Event Message Reference
- Miscellaneous Messages
- Temperature Sensor Messages
- Cooling Device Messages
- Voltage Sensor Messages
- Current Sensor Messages
- Chassis Intrusion Messages
- Redundancy Unit Messages
- Power Supply Messages
- Memory Device Messages
- Fan Enclosure Messages
- AC Power Cord Messages
- Hardware Log Sensor Messages
- Processor Sensor Messages
- Pluggable Device Messages
- System Event Log Messages for IPMI Systems
- Storage Management Message Reference
- Index
- Messages Reference Guide
32 Event Message Reference
AC Power Cord Messages
AC power cord messages listed in Table 2-11 provide status and warning information for power cords that
are part of an AC power switch, if your system supports AC switching.
1453 Fan enclosure removed from system
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Warning A fan enclosure has been removed
from the specified system. The
sensor location and chassis location
are provided.
1454 Fan enclosure removed from system for
an extended amount of time
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Error A fan enclosure has been removed
from the specified system for a
user-definable length of time. The
sensor location and chassis location
are provided.
1455 Fan enclosure sensor detected a non-
recoverable value
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Error A fan enclosure sensor in the
specified system detected an error
from which it cannot recover. The
sensor location and chassis location
are provided.
Table 2-11. AC Power Cord Messages
Event ID Description Severity Cause
1500 AC power cord sensor has failed
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Information An AC power cord sensor in the
specified system failed. The
AC power cord status cannot be
monitored. The sensor location
and chassis location information
are provided.
1501 AC power cord is not being monitored
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Information The AC power cord status is not
being monitored. This occurs when
a system’s expected AC power
configuration is set to
nonredundant. The sensor
location and chassis location
information are provided.
1502 AC power has been restored
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Information An AC power cord that did not
have AC power has had the power
restored. The sensor location and
chassis location information are
provided.
Table 2-10. Fan Enclosure Messages (continued)
Event ID Description Severity Cause