Messages Reference Guide

38 System Event Log Messages for IPMI Systems
Voltage Sensor Events
The voltage sensor event messages monitor the number of volts across critical components. These
messages provide status and warning information for voltage sensors for a particular chassis.
Table 3-2. Voltage Sensor Events
Event Message Severity Cause
< Sensor Name/Location > voltage
sensor detected a failure <
Reading >
where <
Sensor Name/Location > is the
entity that this sensor is
monitoring. For example, "CMOS
Battery."
Reading is specified in volts. For
example, 3.860 V.
Critical The voltage of the monitored device is out of
critical threshold.
<
Sensor Name/Location > voltage
sensor state asserted.
Critical The voltage specified by <Sensor
Name/Location> is in critical state.
<
Sensor Name/Location > voltage
sensor state de-asserted.
Information The voltage of a previously reported <Sensor
Name/Location> is returned to normal state.
<
Sensor Name/Location > voltage
sensor detected a warning
<
Reading >.
Warning Voltage of the monitored entity <Sensor
Name/Location> exceeded the warning
threshold.
<
Sensor Name/Location > voltage
sensor returned to normal<
Reading >.
Information The voltage of a previously reported <Sensor
Name/Location> is returned to normal state.