Messages Reference Guide

System Event Log Messages for IPMI Systems 43
Hardware Log Sensor Events
The hardware logs provide hardware status messages to the system management software. On particular
systems, the subsequent hardware messages are not displayed when the log is full. These messages
provide status and warning messages when the logs are full.
Drive Events
The drive event messages monitor the health of the drives in a system. These events are generated when
there is a fault in the drives indicated.
Memory Mirrored redundancy
regained.
Information This event is generated when the redundancy lost or
degraded earlier is regained in a mirrored
memory configuration.
Memory Spared redundancy
degraded.
Information This event is generated when there is a memory
failure in a spared memory configuration.
Memory Spared redundancy lost. Critical This event is generated when redundancy is lost in a
spared memory configuration.
Memory Spared redundancy
regained.
Information This event is generated when the redundancy lost or
degraded earlier is regained in a spared
memory configuration.
Table 3-9. Hardware Log Sensor Events
Event Message Severity Cause
Log full detected. Critical This event is generated when the SEL device detects
that only one entry can be added to the SEL before it
is full.
Log cleared. Information This event is generated when the SEL is cleared.
Table 3-10. Drive Events
Event Message Severity Cause
Drive < Drive # > asserted fault
state.
Critical This event is generated when the specified drive in
the array is faulty.
Drive <
Drive # > de-asserted
fault state.
Information This event is generated when the specified drive
recovers from a faulty condition.
Table 3-8. Memory Events (continued)
Event Message Severity Cause