Messages Reference Guide
Table Of Contents
- Dell OpenManage™ Server Administrator
- Messages Reference Guide
- Introduction
 - Event Message Reference
- Miscellaneous Messages
 - Temperature Sensor Messages
 - Cooling Device Messages
 - Voltage Sensor Messages
 - Current Sensor Messages
 - Chassis Intrusion Messages
 - Redundancy Unit Messages
 - Power Supply Messages
 - Memory Device Messages
 - Fan Enclosure Messages
 - AC Power Cord Messages
 - Hardware Log Sensor Messages
 - Processor Sensor Messages
 - Pluggable Device Messages
 
 - System Event Log Messages for IPMI Systems
 - Storage Management Message Reference
 - Index
 
 
 - Messages Reference Guide
 

58 Storage Management Message Reference
2116 A virtual disk and its 
mirror have been split
Ok / 
Normal
Cause: A user has caused a mirrored virtual 
disk to be split. When a virtual disk is 
mirrored, its data is copied to another virtual 
disk in order to maintain redundancy. After 
being split, both virtual disks retain a copy of 
the data, although because the mirror is no 
longer intact, updates to the data are no 
longer copied to the mirror.
Action: This alert is provided for 
informational purposes.
1201 606
2117 A mirrored virtual 
disk has been 
unmirrored
Ok / 
Normal
Cause: A user has caused a mirrored virtual 
disk to be unmirrored. When a virtual disk is 
mirrored, its data is copied to another virtual 
disk in order to maintain redundancy. After 
being unmirrored, the disk formerly used as 
the mirror returns to being an array disk and 
becomes available for inclusion in another 
virtual disk.
Action: This alert is provided for 
informational purposes.
1201 607
2118 Change write policy Ok / 
Normal
Cause: A user has changed the write policy 
for a virtual disk.
Action: This alert is provided for 
informational purposes.
1201 601
2120 Enclosure firmware 
mismatch 
Warning / 
Non-critical
Cause: The firmware on the enclosure 
management modules (EMM) is not the 
same version. It is required that both 
modules have the same version of the 
firmware. This alert may be caused when a 
user attempts to insert an EMM module that 
has a different firmware version than an 
existing module.
Action: Download the same version of the 
firmware to both EMM modules.
853 672
Table 4-1.  Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap 
Numbers
Array 
Manager 
Event 
Number










