Messages Reference Guide
Table Of Contents
- Dell OpenManage™ Server Administrator
- Messages Reference Guide
- Introduction
 - Event Message Reference
- Miscellaneous Messages
 - Temperature Sensor Messages
 - Cooling Device Messages
 - Voltage Sensor Messages
 - Current Sensor Messages
 - Chassis Intrusion Messages
 - Redundancy Unit Messages
 - Power Supply Messages
 - Memory Device Messages
 - Fan Enclosure Messages
 - AC Power Cord Messages
 - Hardware Log Sensor Messages
 - Processor Sensor Messages
 - Pluggable Device Messages
 
 - System Event Log Messages for IPMI Systems
 - Storage Management Message Reference
 - Index
 
 
 - Messages Reference Guide
 

74 Storage Management Message Reference
2202 A global hot spare has 
been removed.
Warning / 
Non-critical
Cause: The controller is unable to 
communicate with a disk that is assigned as a 
global hot spare. The disk may have been 
removed. There may also be a bad or loose 
cable.
Action: Check if the disk is healthy and that 
it has not been removed. Check the cables. 
If necessary, replace the disk and reassign the 
hot spare.
903 None
2203 A dedicated hot spare 
failed.
Warning / 
Non-critical
Cause: The controller is unable to 
communicate with a disk that is assigned as a 
dedicated hot spare. The disk may have failed 
or been removed. There may also be a bad or 
loose cable.
Action: Check if the disk is healthy and that 
it has not been removed. Check the cables. 
If necessary, replace the disk and reassign the 
hot spare.
903 None
2204 A dedicated hot spare 
has been removed.
Warning / 
Non-critical
Cause: The controller is unable to 
communicate with a disk that is assigned as a 
dedicated hot spare. The disk may have been 
removed. There may also be a bad or 
loose cable.
Action: Check if the disk is healthy and that 
it has not been removed. Check the cables. 
If necessary, replace the disk and reassign the 
hot spare.
903 None
2205 A dedicated hot spare 
has been 
automatically 
unassigned.
Warning / 
Non-critical
Cause: The hot spare is no longer required 
because the virtual disk it was assigned to has 
been deleted.
Action: None.
903 None
Table 4-1.  Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap 
Numbers
Array 
Manager 
Event 
Number










