Messages Reference Guide

Storage Management Message Reference 75
2206 The only hot spare
available is a SATA
disk. SATA disks
cannot replace SAS
disks.
Warning /
Non-critical
Cause: The only array disk available to be
assigned as a hot spare is using SATA
technology. The array disks in the virtual disk
are using SAS technology. Due to this
difference in technology, the hot spare cannot
rebuild data if one of the array disks in the
virtual disk fails.
Action: Add a SAS disk that is large enough
to be used as the hot spare and assign the new
disk as a hot spare.
903 None
2207 The only hot spare
available is a SAS
disk. SAS disks
cannot replace SATA
disks.
Warning /
Non-critical
Cause: The only array disk available to be
assigned as a hot spare is using SAS
technology. The array disks in the virtual disk
are using SATA technology. Due to this
difference in technology, the hot spare cannot
rebuild data if one of the array disks in the
virtual disk fails.
Action: Add a SATA disk that is large enough
to be used as the hot spare and assign the new
disk as a hot spare.
903 None
2211 The physical disk is
not supported.
Warning /
Non-critical
Cause: The physical disk may not have a
supported version of the firmware or the disk
may not be supported by Dell.
Action: If the disk is supported by Dell,
update the firmware to a supported version.
If the disk is not supported by Dell, replace
the disk with one that is supported.
903 None
2232 The controller alarm
is silenced.
Ok /
Normal
Cause: This alert is provided for
informational purposes.
Action: None
751 None
2233 The BGI rate has
changed.
Ok /
Normal
Cause: This alert is provided for
informational purposes.
Action: None
751 None
2234 The "Patrol Read" rate
has changed.
Ok /
Normal
Cause: This alert is provided for
informational purposes.
Action: None
751 None
Table 4-1. Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap
Numbers
Array
Manager
Event
Number